3xxx
Series
1xxx & 3xxx Series
1050, 1060, 1100 (O, H14, H24) for electrical busbars, heat exchangers, chemical vessel lining and HVAC ducting. 3003, 3105 for architectural roofing, insulated panels, MEP cladding and general sheet metal.
India to GCC Supply
Aluminium Sheets & Plates Exporter in Middle East & GCC
Siddhgiri Overseas is a premier global exporter and master distributor of high-integrity aluminium sheets, plates, coils, and shims across the Gulf Cooperation Council (GCC). Operating with deep mill partnerships and agile staging yards, we support mission-critical sectors including offshore marine, oil and gas, architectural cladding, defence, aerospace, and precision CNC fabrication across Saudi Arabia, the UAE, Qatar, Kuwait, Oman, and Bahrain.
As a master stocking distributor and direct exporter to GCC industrial centers, Siddhgiri Overseas specializes in supplying structural and high-strength aluminium plates in Aluminium 6061 Sheets and Aluminium 7075 Sheets.
MOQ from 100 kg
7 working days dispatch
~10 days ocean transit
EN 10204 3.1 MTCs
VCI & ISPM-15 packing
SABER & TPI support
GCCArabian Sea lanes
Commercial Terms
Export Specification & Standard Terms
Minimum Order Quantity (MOQ)
100 kg
Supports urgent turnaround stock, project top-ups, and prototype sampling
Ex-Stock Dispatch Window
7 working days (custom mill-run schedules: 3–4 weeks)
Transit Time to GCC Hubs
~10 days ocean freight from primary port stakings
Supported Incoterms
CIF, CFR, FOB, DDP, EXW
Accepted Payment Structures
100% Irrevocable LC at Sight • 30% Advance + 70% against BL copy
Manufacturing Standards
ASTM B209 / ASME SB209, EN 485, EN 573, AMS-QQ-A-250
Third-Party Inspection
Available via SGS, Bureau Veritas (BV), TÜV SÜD, and Intertek
Material Grades
1xxx to 7xxx Series Aluminium Sheets & Plates
3xxx
Series
Series
5xxx Marine Grades
5052, 5083, 5086, 5754 in O, H32, H111, H116, H321 tempers for marine hulls, offshore platforms, coastal storage tanks and cryogenic equipment with enhanced magnesium content and sensitization testing.
7xxx
Series
6xxx & 7xxx High-Strength
6061, 6082 (T6, T651, T4) for CNC structural parts, transport chassis and fixtures. 7075 (T6, T651, T7351) for high-stress defence, aerospace parts, precision tooling jigs and high-load machinery.
Regional Solutions
Solving Aluminium Fabrication & Machining Pitfalls Across the GCC
Eliminating CNC Plate Warping with T651 Tempers
Standard T6 plates carry residual stresses from quenching. Siddhgiri Overseas supplies strictly controlled T651 temper plates (6061-T651 and 7075-T651) stretched 1.5%–3% after solution heat-treatment, neutralizing internal stress for flatness and zero-rework machining.
Preventing Press-Brake Cracking & Chloride Pitting
Fine-grained O, H14 and H24 temper sheets engineered for 90°–180° bending with tight bend ratios. Certified 5xxx marine-grade alloys (5083-H116/H321, 5052-H32) resist intergranular chloride attack in coastal oil & gas facilities.
International Standards
ASTM B209 / ASME SB209 & EN Standards
ASTM B209 / ASME SB209
Standard specification for aluminium and aluminium-alloy sheet and plate. Covers chemical composition, mechanical properties, dimensional tolerances, heat treatment and surface finish requirements for high-integrity applications across aerospace, marine and industrial sectors.
EN 485, EN 573 & AMS-QQ-A-250
EN 485 / EN 573 European standards for sheet, strip and plate. AMS-QQ-A-250 series for aerospace-grade aluminium alloy plate and sheet used in defence and precision applications.
Size Range
Technical Specifications & Dimensional Capabilities
| Parameter | Range / Capability | Notes |
|---|---|---|
| Thickness Range | 0.2 mm to 50.0 mm | ASTM B209 / ASME SB209 tolerances |
| Width Range | 100 mm to 2,600 mm | Extra-wide plates available upon request |
| Length Range | 500 mm to 10,000 mm | Cut-to-length custom plates available |
| Surface Finishes | Mill Finish, Bright Anodized, Stucco Embossed, Checkered / Tread Plate (5-Bar), PVC / PE Protective Film | Single or double side coating |
Custom Processing: Precision Coil Slitting (narrow widths down to 50 mm, burr-free), Cut-to-Length (CTL) up to 2,600 mm width, CNC Plate Sawing & Waterjet Cutting for near-net-shape blanks.
Alloy Matrix
Comprehensive Alloy Series for GCC Applications
| Series | Common Alloys | Dominant Temper | Primary Applications across GCC |
|---|---|---|---|
| 1xxx Series | 1050, 1060, 1100 | O, H14, H24 | Electrical busbars, heat exchangers, chemical vessel lining, HVAC ducting |
| 3xxx Series | 3003, 3105 | O, H14, H24 | Architectural roofing, insulated panels, MEP cladding, general sheet metal |
| 5xxx Series | 5052, 5083, 5086, 5754 | O, H32, H111, H116, H321 | Marine hulls, offshore platforms, coastal storage tanks, cryogenic equipment |
| 6xxx Series | 6061, 6082 | T6, T651, T4 | CNC machined structural parts, transport chassis, rail structures, fixtures |
| 7xxx Series | 7075 | T6, T651, T7351 | High-stress defence, aerospace parts, precision tooling jigs, high-load machinery |
Mechanical Properties
Guaranteed Surface Flatness Standards
| Alloy & Temper | Yield Strength (Rp0.2 MPa) | Tensile Strength (Rm MPa) | Elongation (A50 %) | Flatness Guarantee |
|---|---|---|---|---|
| 5052-H32 | 195 | 215-265 | 10 | 3 mm/m stretcher leveled |
| 5083-H116 | 215 | 305-380 | 12 | 2 mm/m marine standard |
| 6061-T651 | 240 | 290 | 8 | Precision flat (1.5 mm/m) |
| 7075-T651 | 460 | 540 | 7 | Precision aerospace flatness |
Our plates meet or exceed ASTM and EN mechanical criteria, providing consistent yield, tensile, and elongation profiles across every heat number.
End-Use Sectors
Aerospace, Marine and Industrial Applications
Aerospace & Defence
High-stress 7075-T651 and 6061-T651 plates for defence structures, aerospace components and precision tooling across Abu Dhabi, Riyadh and Doha.
Marine, Coastal & Offshore
Corrosion-resistant 5083-H116 / H321 and 5052-H32 plates for marine hulls, offshore platforms, coastal storage tanks and desalination facilities.
Architectural & CNC Fabrication
Fine-grained O / H14 / H24 sheets for façade panels, standing-seam roofs, MEP ductwork and stress-relieved plates for complex CNC machining.
Quality Assurance
Certification, Traceability & Inspection
EN 10204 Type 3.1 Certification
Verifiable test reports specifying real chemical heat analysis, mechanical tensile and yield curves, and hardness parameters matching the permanent stamp or stencil on each plate.
Stress-Relieved T651 Tempers
Mechanically stretched plates (1.5%–3% permanent set) neutralize residual stresses from quenching, delivering guaranteed flatness for heavy CNC milling without warping.
Marine Sensitization Testing
5xxx series plates undergo ASTM G66 / G67 grain-boundary sensitization testing to ensure resistance to intergranular chloride attack in coastal and offshore environments.
Third-Party Inspection (TPI)
Facilities fully accessible to buyer-appointed inspectors (SGS, Bureau Veritas, TÜV, Intertek) for witnessing dimensional measurements, PMI checks, and packing.
Ocean-Ready Packing
Maritime Export Packaging: Bone-Dry Moisture-Barrier Protection
Drag or swipe to explore
Thermal Stabilization
Sheets and plates are quarantined in a climate-controlled bay to equalize core metal temperature with ambient packaging room conditions before sealing.
ISPM-15 Heat-Treated Skids
Solid-runner, heat-treated, ISPM-15 stamped wooden skids or fully enclosed wooden cases designed for direct forklift and crane handling.
VCI Film & Desiccants
Multilayered packing with inner paper interleaf, heavy VCI film, industrial polyethylene wrap and silica gel packs to prevent white rust and water staining.
Edge & Corner Guards
Heavy galvanized steel or corrugated hardboard angle runners safeguard sheet edges against strap crimping and hoist impacts during maritime transit.
Logistics Network
GCC Export Documentation and Logistics
| Country | Primary Destination Ports | Direct Ocean Transit Window | Inland / Free Zone Service |
|---|---|---|---|
| United Arab Emirates | Jebel Ali Port (Dubai) Khalifa Port (Abu Dhabi) |
8–10 Days | JAFZA, DAFZA, KIZAD, Sharjah |
| Kingdom of Saudi Arabia | King Abdulaziz Port (Dammam) Jeddah Islamic Port |
10–14 Days | Riyadh Dry Port, Jubail, Yanbu, ICAD |
| Qatar | Hamad Port (Doha) | 10–12 Days | Mesaieed, Ras Laffan, Doha Industrial |
| Kuwait | Shuwaikh Port Shuaiba Port |
12–14 Days | Al Ahmadi, Subiya, Shuwaikh Industrial |
| Oman | Port of Sohar Port of Salalah |
7–9 Days | Duqm, Muscat, Rusayl Industrial Estate |
| Bahrain | Khalifa Bin Salman Port (Hidd) | 10–12 Days | Manama, Sitra, Alba Industrial Zone |
SABER, SASO & GCC Customs Compliance: Fast registration via the SABER platform with certified Product Conformity Certificates (PCoC) and Shipment Conformity Certificates (SCoC). Legalized Chamber of Commerce Certificates of Origin (COO), commercial invoices and packing manifests indexed to shipping container seals. Multi-modal options include FCL, LCL and air freight.
Common Questions
Aluminium Sheets & Plates Export FAQs
What is the minimum order quantity for ex-stock delivery?
Our minimum order quantity is 100 kg for ready-stock materials, ideal for urgent and small-scale requirements.
Do you offer stress-relieved plates for complex CNC machining?
Yes. We stock 6061-T651 and 7075-T651 plates to minimize internal stress, warping, and distortion during machining.
How do you prevent water stains and white rust during sea shipments to GCC ports?
We use thermal stabilization, VCI moisture-barrier films, desiccants, waterproof packaging, and ISPM-15 wooden skids.
Do you support SABER registration for deliveries to Saudi Arabia?
Yes. We assist with SABER registration, including PCoC, SCoC, compliant packing lists, and commercial invoices.
Can third-party inspection agencies inspect plates before shipment?
Yes. We facilitate inspections by SGS, Bureau Veritas, TÜV, and Intertek to verify dimensions, packaging, and heat-number traceability.
Ready to Order?
Request a Quote for GCC Ports
Ensure your projects stay on track with rapid dispatch, verified metallurgical traceability, and secure export packaging. Contact our international export team for direct CIF, CFR, FOB or DDP quotes to any GCC port.
Siddhgiri Overseas • Staging Yard &
Export Facility: Mumbai, Maharashtra, India
sales@siddhgirioverseas.com •
siddhgiriexports100@gmail.com
+91 97734 70471 / +91 96194 06392